Do Integral hinges and Rationell drawers fit Ikea Metod?

I have an old Faktum kitchen and want to buy a new Metod kitchen. Since I still have integral hinges and Rationell drawers from the Faktum, I would like to reinstall them in the new Metod. This way, I don’t have to buy everything new and can save a lot of money. Are the Faktum hinges and drawers also compatible with Metod?

Hello,
they are not really compatible. INTEGRAL hinges have a different mounting plate. This could be exchanged. However, they also have two "guide pins" for 5 mm holes, whereas METOD uses 8 mm.

The carcasses of FAKTUM are 2 mm narrower. If the pull-outs were purchased after 2007, this causes problems. Then something with a thickness of 1 mm would need to be added on both sides. Additionally, the holes in the carcass have different positions, so new holes would have to be drilled. The same applies to the fronts. The holes are in different places and those for the front holders now have a distance of 19 mm instead of 32 mm.
Conclusion: With elaborate tinkering it works, but not "out of the box".

Do you happen to still have the old Faktum hinges? I urgently need 4 pieces for my old refrigerator, hinges from Ikea for the old Faktum/Rationell kitchen. They come from BLUM and have the designation BLUM 80.050-01. I would like to buy them from you for €10 each. Thanks in advance- Best regards, Berit