Custom bedroom wardrobe or standard furniture?

  • Erstellt am 2018-07-29 10:33:56

Maria16

2018-07-29 14:42:20
  • #1
How much space is there between the walls on the left and right? So how much space will be left between 2 x 65-70 cm deep cabinets?

The question is because we had also planned two cabinet walls at one point and luckily only started with one side for now. The 2nd side will now, after a few months of your life, no longer reach the ceiling so that it feels more spacious overall.
 

Curly

2018-07-29 15:21:10
  • #2
As I see it in the picture, the left wall is shorter than the right one and a door frame will also be installed. The wardrobe surely won't be pushed all the way to the wall on the window side; there is surely a 2cm baseboard on the floor as well. It also looks kind of strange if the wardrobe extends directly to the door frame or passage. I would take the 2.75m Pax. We have now set up over 12m Pax wardrobes here and are really satisfied with them; you can arrange them however you want.

Best regards
Sabine
 

kbt09

2018-07-29 18:03:12
  • #3
I would also take the 275 cm Pax, as far down as possible according to the plan, and at the distance from the top of the plan to the wall that then remains, put one or two hooks on the wardrobe wall. Then in the niche you can hang, for example, the morning T-shirt that you can wear again the next morning, and dress up in the afternoon, or have a place for the bathrobe or to hang a few bags, etc.

And at the bottom of the plan I would probably actually put the sliding door, then you can set up the Pax wardrobes without doors.
 

tomtom79

2018-07-29 18:17:24
  • #4
Nolte has the right grid.

30/40/50/60/70/80/90/100/120

Available for good money in every xxxl

Height was, I think, 250.

I paid about 850 euros for a 6-meter wardrobe without drawers.

You’d better buy shelves individually, it also saves money.
 

HilfeHilfe

2018-07-29 19:32:37
  • #5
can only recommend Pax. it doesn't get any better. you can always still "tinker around"
 

grinchmaster

2018-07-30 13:01:35
  • #6
We had the cabinets of our dressing room custom-made by the carpenter. Fully equipped with doors, drawers, shelves, and clothes rails, it was approximately the same price as the PAX carcasses with the cheapest doors – without interior fittings. Due to the room size, we would have only been able to set up two opposite cabinet walls with the PAX grid and would have had to leave the end wall free. So significantly less cabinet space.
 

Similar topics
10.08.2010Installing the bottom drawers in the Ikea Pax wardrobe14
27.11.2011Problem with PAX Ikea Lyngdal sliding doors, incorrectly hooked10
02.11.2011Pax / PAX Malm IKEA Assembly Instructions + Support for Sliding Doors10
26.05.2013Problem with IKEA PAX sliding doors14
14.08.2012IKEA PAX hinged door crooked, how can the problem be fixed?14
25.07.2022Ikea Pax Auli/Färvirk doors - Drawers hit against the sliding door14
27.03.2016Conclusion on Ikea Pax wardrobe quality13
19.02.2011Successor of Ikea Pax cabinets in birch18
12.03.2012Does the large Ikea Pax with sliding doors fit in my room?35
04.09.2010Ikea Pax wardrobe 2 meters wide, rails for sliding doors are missing11
01.07.2021Ikea Pax wardrobe - door hinge and drawer collision12
16.05.2016IKEA PAX wardrobe & Striberg light strip problematic combination11
04.05.2017Does IKEA PAX 236cm fit in a room height of 236cm? Experience11
12.02.2018Actions Ikea Pax Wardrobe21
28.04.2022Dressing room with or without wardrobe64
15.09.2021Ikea Pax utility room/laundry room system? - What do you have?64
01.03.2021IKEA Platsa and PAX quality differences experiences?18
27.12.2021What does a successful wardrobe look like?33
01.04.2022Include the width of the Pax wardrobe from Ikea in the floor plan15
11.05.2022IKEA Elvarli wardrobes for walk-in closet?16

Oben