Assembling hinge parts of Ikea Besta display cabinet door

I want to install the display cabinet door in the tall Besta cabinet. According to the instructions, the wooden part should be connected with the glass-side part of the hinges before snapping into the glass. I have understood the system. But it does not click. Who can give me instructions on how to bring the two hinge parts together with a "click"? Thank you!

Do you have a link to the product and thus to the assembly instructions? Which step in the instructions are you referring to?

Hello, I have the same problem. In my manual it is point 4. I have already tried it with two different doors, about 1 hour, the carcass is scratched from the aluminum frame and it still doesn't work...

There are different display cabinet doors, probably referring to Besta Tombo. The hinge looks like a Hettich hinge with System 9000. First, check if the mounting plate has been installed the right way round. The hole must point backwards. The clipping on is poorly illustrated. The hinge arm has two hooks near the frame that must engage under the sheet metal of the mounting plate. The best way to achieve this is to attach the hinge arm at an angle, roughly at about 30°, and then slip the hooks underneath. Then press the other end onto the plate until it clicks. You should always start with the upper hinge. I hope I was able to express myself clearly enough.

Wow! I am thrilled, earlier we tried desperately and unsuccessfully for over an hour together. Now I tried your tip - alone, and with freshly moisturized hands, because I was so curious and didn't want to wait, and I managed it in 20 seconds... A thousand thanks, my evening is saved and so is my mood!

Hello,

I am not an expert, but the easiest way is when one does not yet firmly attach the mounting tape. I clipped the mounting tape directly to the hinge and then screwed the mounting tape on. Works perfectly. :p