Spice rack in the upper cabinet with built-in extractor hood

  • Erstellt am 2016-06-18 20:18:11

wolf2000

2016-06-19 14:42:57
  • #1
For the assembly of the back panel, I screwed a battens on the left and right sides to the side walls. I then screwed the back panel onto the battens so that the shelf can be quickly removed if necessary. The screws are just above the small shelves and are hardly visible. I also put white caps on them, but that wasn't absolutely necessary.

I screwed the shelves from behind through the back panel and applied glue beforehand, so they are firmly connected.

The separate narrow back panel directly in front of the fan unit was a bit tricky because of the hinge. I cut it to fit and screwed it on the sides through two side walls each.
 

nachtvogel

2016-06-20 02:11:24
  • #2
I have something similar in mind for our range hood, which will be installed. I even have a width of 80cm. I think quite a bit of stuff that is usually needed near the cooktop can disappear in there.
 

Sektionschef

2016-06-20 13:43:27
  • #3
Looks good but I would always be afraid that one of the glasses might fall and damage the cooktop...
best regards
section head
 

wolf2000

2016-06-20 15:52:26
  • #4
Most of it is plastic anyway, so nothing has happened here so far. If someone wants to be absolutely sure, they could install a small aluminum rod or something as a fall protection. But then it becomes more complicated to take out the spices. Or you always pull out the extractor hood when you want to take out spices.
 

Similar topics
06.08.2015Spice drawer - 15 cm or 30 cm?24
02.12.2015Flexible cooktop / FlexInduction / Teppanyaki16
18.10.2015First Ikea kitchen... Now with backsplash (p. 7)61
28.04.2016Height of cooktop/oven + length of countertops16
26.11.2017Electric cooktop and coal stove in new kitchen32
08.10.2019Looking for ideas for a shower back wall / tile size problem14
19.05.2022Induction stove vs. "normal" cooktop31
19.04.2023Neff cooktop - inset or surface-mounted?10
13.01.2025Does the IKEA Besta series back panel lack stability?14

Oben