Separate water meter for the external tap point - connection

Yep, the same with us, the costs are then similar, whether with or without an additional meter.

That's why everyone simply drills a well.

Here [ZVO]. Simple. Buy yourself a calibrated meter. Go with it to the local sewage plant, ring the bell. The waterworks guy opens, invites you into the control room, grabs a piece of paper, writes down the meter and your address, gives you a seal and says goodbye and install it yourself or connect it, okay? And the whole procedure takes five minutes and costs nothing extra, just the meter itself. It’s already a punishment to be a Berliner.

So here it was even easier City of Voerde, buy meter, install meter, take photo of the dispensing point with meter, send photo by email to the city done.

I simply bought a calibrated meter on Amazon, screwed it on myself, and sealed it. Then I filled out a form from the office (meter number, address, and meter reading) and submitted it there in person. The responsible employee ran towards me in the hallway, I gave him the form, and he just said that I should report the meter reading by phone at the end of the year... easy!

I also simply bought a calibrated meter on Amazon and installed and sealed it myself. Then I filled out a form from the office (meter number, address, and meter reading) and submitted it there in person. The responsible employee ran up to me in the hallway, I gave him the form, and he just said that I should report the meter reading by phone at the end of the year... easy!

As I said, it's different for us. The poor municipality wants to make money. You have to rent the meter and use their technicians.

Without a filling?

Yep, no problem. At the end of the year, simply send the meter reading by email to the caseworker and everything is fine.