Reading a drawing - height information?

  • Erstellt am 2020-07-22 22:00:42

kbt09

2020-07-23 06:45:16
  • #1
86 cm parapet height and on top of that, with some padding, the worktop results in a working height of 91 cm. What you need to clarify is whether the window frame has at least about 6 cm in height. This allows 5 cm to be used for padding and the worktop.
 

Curly

2020-07-23 08:53:04
  • #2
In our plans, for example, there was a parapet height of 1m (4 rows of bricks) and later this became a finished height of 90cm, screed and underfloor heating were about 15cm, and the windowsill and plaster/mortar underneath were about 5cm. The plans were used by the bricklayers on site for building.

Best regards
Sabine
 

Similar topics
06.09.2013Good worktop27
13.03.2015Opinions on window parapet height sought30
29.07.2016Trash bin in the countertop24
20.10.2016Parapet height window, balcony & railing – What to consider?15
05.01.2017Bathtub in front of the window - parapet height?14
06.12.2013Reinforce countertop numeral for cutouts13
28.01.2014Base of the refrigerator and countertop above the refrigerator19
09.12.2016Worktop 5-10mm too short13
11.07.2017Compensate for missing parapet height with Styrodur plates18
25.10.2018Countertop ceramic, quartz or natural stone47
18.10.2020Worktop lighting - URail by Paulmann24
20.07.2018Problem calculating the parapet height for a worktop running into the window24
07.12.2018How much should a worktop made of oak wood cost?16
09.07.2019New construction window parapet height for guest bathroom30
09.04.2021Parapet height fixed kitchen window 1.35 m?47
29.11.2021Window sill height 130 in the bedroom / study?93
28.03.2022Error in the countertop, allegedly natural…36
22.05.2022Window sill height 25 or 50 - height of fall protection28

Oben