Pull the cable through the conduit

The empty conduit now seems to be the weak point. Can't the new cable be laid next to it as an underground cable or with a new conduit? Camera and co cost immense amounts after all.

The empty conduit seems to be the weak point now. Can't the new cable be laid next to it as an underground cable or with a new conduit? The camera and stuff cost immense sums.

Are you talking about the endoscope? It cost 27€ on the internet.
Well, I didn't have such a large conduit installed down there for nothing. I just wanted to be able to push it through easily.

I'll keep you updated.

Well, my thought was, if the empty conduit is clogged, to set aside a small amount of money for that, if possible?

I have to properly expose the other cables first. I also want to check if they are all intact. Especially the 5x16mm. I don’t want to have a big short circuit there in two years because the insulation somehow got damaged.

Here I am again. I have now exposed the spot.



Luckily, the cables remained intact.

Please share ideas for repair.

Cut a piece of empty conduit cleanly lengthwise and slip it over both ends. Then fix it with plenty of adhesive tape. There is probably no completely clean solution.