Program for kitchen planning, sketch! (Sockets, water connection)

We modeled our kitchen with the Ikea planner.
Sent the whole thing as a PDF to the electrical trade and roughly clarified where/how many sockets should go - corners, refrigerator, lighting, …
They then sensibly marked them and sent it back.
Added one or two things again - done.

I can create a plan with cabinets as I wish, no matter the grid, color, height. And then I can write in it with a simple paint program what is there, likewise length measurements, etc.

Example


from the wall plan left
65 cm dead corner
60 cm dishwasher
60 cm base cabinet with sink

That means my connections must be centered behind the sink base cabinet, approximately at 155 cm from the plan left. It can't be easier.

I can also create view images with it.

one box is 10x10cm

… rather 50 x 50 … cm ;)
And a few filler words

hm, . I have been using the program daily for 10 years?

hm, . I have been using the program daily for 10 years? [ATTACH alt="programm-fuer-Küchenplanung-skizze-steckdosen-wasseranschluss-580049-1.png"]72578[/ATTACH]

You mean the small ones, yes :) They were not visible on the phone.

In the end, only the drain connection for the sink and the dishwasher is important. It should be roughly where the sink will be later. Electrical and water connections do not have to fit precisely; all of that can be routed in the kitchen base cabinet.