Loading drawer for new Ikea Faktum sink cabinet

Hello, for my 80 cm sink cabinet I have 2 40 cm doors. Additionally, a half pull-out from Rationell that is supposedly supposed to fit (201 101 68) (with a separate panel). Unfortunately, it hits the doors because there is easily 1.5 cm missing. How is this supposed to be combinable?

Hello,

tell me, did they sell it to you like that in the store?

I guess you want to build the waste separation into the cabinet? Then it's already the wrong drawer. For that, it has to be the pull-out with a 45 cm depth. What do you mean the drawer hits the doors? Does the door not close or does the drawer not get past the doors? If it’s the first case, it should be an adjustment problem. Just take a photo. If it’s the second case, you simply have the wrong hinges. The standard hinges (125 mm) are not compatible with pull-outs because the doors don’t fully swing open. That’s why the drawer doesn’t get past the doors. You have to buy the 153 mm hinges, then the drawer will work.

Let me know if it worked.

NfU

Na.

Hello, thanks for the response, it definitely only works with 153 degree hinges, unfortunately it was sold incorrectly in combination, as I found out yesterday - just that I can't open the doors that far because of the heating. Now I have the new sink cabinet, where without the pull-out unfortunately everything stored under the cabinet can fall in the back - because the bottom back panel is now missing. Best regards N.