Insulate cold roof with clamp felt, price

  • Erstellt am 2019-02-15 17:39:26

Nordlys

2019-09-13 23:16:12
  • #1
Done. Self-made. 160 mm insulation fleece. Climafolie, so, the one that opens when warm and closes when cold. Sicrall, adhesive mass and 240 m of shuttering board and 40 m of roof battens, screws, nails, it cost 1500,- and 2 days of work for two people. I refrained from drywall. Why? My storage room can also have foil walls.
 

netuser

2021-07-13 13:45:32
  • #2


Hello everyone!

I read through the thread with interest, as usual, very divided opinions here regarding insulation of a cold roof.
We are still in the construction phase and are considering using the construction time before moving in to possibly add insulation.... Not an easy decision :)

A quick question about drywall or foil walls...
Wouldn't drywall have at least some "moisture-regulating" effect here and thus reduce the risk of theoretically possible condensation forming on the foil?
 

11ant

2021-07-13 14:15:39
  • #3

Gypsum is not clay ... (?)
The post should be at least 30 characters long.
 

HausTmMike

2021-07-13 15:22:04
  • #4
Tell him to use a diffusion-open vapor barrier foil. And then accept the offer. It costs 1.50 / m2 more. In return, you won’t have any problems with moisture and mold. I find the price more than fair. Material with insulation (10€/m2), substructure and drywall (10) + foil (2.50) already amounts to over 20. Of course, you can consider taking a week off and doing it yourself. I would plan about 100 hours of pure working time if you can work hard. Otherwise 200+
 

i_b_n_a_n

2021-07-13 19:26:28
  • #5
The offer dates from 2019, when corpse desecration was carried out once again. I only noticed it of course when I awarded Dr. Hix an "i love it" :p
 

netuser

2021-07-14 01:30:46
  • #6


I plead guilty. It was an attention test ;)

I thought it would be better this way than opening new threads on the same questions ...!?

Thanks 11ant, as always short and painless.
 

Similar topics
31.12.2010Installing drywall on walls16
14.06.2011New building: Which insulation is appropriate?14
10.07.2011Wall construction and insulation for Kfw 70 house, okay?19
28.10.201236 cm Ytong exterior wall, solid construction, mold formation, insulation37
22.09.2012Insulating prefabricated house with additional insulation, DIY, inexpensive styrofoam19
08.11.2012Insulation in the 70s compared to today, modern insulation, heating costs26
20.11.2012General questions about insulation10
14.01.2013Insulation / Vapor Barrier Top Floor Ceiling / Collar Beam, Open Ceiling14
25.06.2013Saddle roof/insulation into the ridge or up to/on the intermediate ceiling?10
01.07.2013Additional insulation in the Ytong basement (36 cm)14
08.08.2015Insulation wooden beam ceiling10
07.04.2014Planning attic conversion in new construction - heating, ventilation, insulation?14
25.07.2014Great house with some limitations. Access / insulation14
07.03.2018Painting drywall with/without painter’s fleece23
18.03.2024Attic problem. High humidity - Controlled residential ventilation?39
19.05.2021Substructure facade rhombus battens without insulation19
02.06.2023Marten in the roof insulation, what can I do???27
09.03.2021Reinforce floor slab insulation, reduce heat entry into the upper floor13
24.03.2023Work on basement ceiling insulation with stone wool48

Oben