Ikea Pax sliding doors over multiple cabinets?

Hello,

I want to buy a Pax wardrobe with a width of 3m. But I am still considering whether I should choose sliding doors.
For the 3m width, there are 2 x 1.5m doors. But they are definitely too wide for me; you would only be sliding back and forth all the time.
Therefore, I would rather place two individual wardrobes, each 1.5m wide, next to each other, so you would have 4 x 0.75m doors.

My question is: Can the door rails of the two partial wardrobes be connected in such a way that you can also slide the doors to the other wardrobe side? Or are the doors always restricted to their side?
Then you could also practically use cheaper 1m carcasses instead of the 75cm ones.

I hope you understood that...
Marc

With the doors it would work, but with the rails it doesn't. Because of the cutouts on the rails from the side walls of the korpen.

I took a look at it on site yesterday. Notching out the [Leistenleisten] should not be a problem. But the running rails are 1.5cm too short, so the doors would have to jump over a 3cm gap. Or I’ll try to get a longer running rail from a wider sliding door. We'll see...