Ikea Pax is sagging to the left side

Hello,

we have a big problem with our Pax wardrobe with 2 glass sliding doors.

The wardrobe seems to have sagged on the left side.
The doors open by themselves and the doors are so low at the bottom on the left side that they slip out of the guide rail.

We held a spirit level against it and could not detect any abnormalities.

What we noticed is that the lower left bottom panel with the adjustable feet is cracked at the connecting screw to the side wall.

Can someone give us a tip? Does anyone even know the problem and the corresponding solution?

If the bottom is broken out, this indicates that the cabinet stood on its feet for height adjustment. The lower bottom cannot withstand that. The side panel would now have to have sunk there, causing the carcass to be twisted. You can try to lift the side by carefully tilting it back and forth and placing a wedge underneath until everything fits. If it doesn’t work, it probably means replacing the carcass.

Yes, the wardrobe stands on the feet for height adjustment. So, in your opinion, the left side panel would have to be supported by tilting it back and forth until the doors fit properly again?

This is how I would try it. If something has warped elsewhere due to the sinking, it might not work without rebuilding the cabinet. In any case, you should support all sidewalls that do not stand on the floor so that the floor does not break out there as well.