Geothermal heating and domestic water, surface collector/deep drilling?

  • Erstellt am 2009-10-31 15:22:20

Empire

2009-10-31 15:22:20
  • #1
Hello!

We are currently planning to build a house, and that includes finding the right heating system.
We recently visited an installer near us, and he recommended a geothermal heating system.
We are planning a bungalow of about 120 m² including mechanical ventilation to achieve a nearly zero-energy house.

Our installer recommended a heat pump from KNV with direct evaporation and a ground collector. The house and drinking water should be heated with it.

Which brand would you recommend? Should we rather choose a ground collector (how many m²?) or a deep borehole (how deep?).

I saw that KNV and Ochsner use the refrigerant R407c and Heliotherm uses R410A.
Is there a difference?
I also saw that there are MODULATING heat pumps. Are these preferable? And why?
Oh yes, and last but not least, does anyone know the price of any brand? I couldn’t find prices for Heliotherm and Ochsner online.

Best regards
Daniel
 

parcus

2009-11-03 13:36:30
  • #2
The topic is very complex and cannot be separated from the overall package [Haus]. I would also always seek independent information.

Best regards
 

Empire

2009-11-03 15:26:09
  • #3
Hello,

regarding geoJETTING. I had not heard of it until now.
Do they offer it in Austria as well? Where can one find a company that does this?
 

parcus

2009-11-03 16:50:50
  • #4
Oops, I didn't expect Austria, I have to pass on that.
 

Soundsurf

2009-11-05 11:43:00
  • #5
Hello,

we have recently moved into a Kfw 60 house with a geothermal heat pump (deep drilling) and controlled ventilation with heat recovery.

The heat pump itself is from Waterkotte, the AI1, with which you can even cool in summer. Two of my colleagues have had this for several years and are also very satisfied. I have only heard positive things about it so far.

The depth of a drilling depends on the living area and the insulation of the house. This is then calculated based on the parameters.

Hope this helps you.

Best regards Soundsurf
 

Similar topics
10.12.2009Subsidies for KFW55 and Sole/Water Heat Pump15
06.01.2012Geothermal vs. Air-to-Water Heat Pump12
26.08.2013Which heat pump is most suitable for our new building?13
01.07.2013But no heat pump in a single-family house?15
28.08.2013New single-family house, gas or heat pump, target KfW5529
18.02.2014Solar heat pump / what to watch for in the offer (single-family house, new construction, KFW70)22
05.03.2014Gas condensing boiler or LW heat pump for water-bearing fireplace?18
26.08.2015Cost Breakdown Heat Pump - Heat Pump with Ground Collectors23
25.11.2016Efficiency of Heliotherm flat collectors14
17.04.2018Heat pump domestic water storage tank - What size is recommended?12
01.12.2020Eligible costs for heat pump134
10.12.2020Heat pump Knv or IDM air heat pump13
06.12.2020New construction KFW55 house - heating design, different statements22
08.10.2021Air-water heat pump combined with underfloor heating does not work properly65
02.03.2023Heat pump for KfW55 house 148 sqm99
21.09.2023Installer installs wrong heating system, offer vs order confirmation13
31.03.2024Which brine-water heat pump Viessmann, Niebe or Stiebel WPE-I 10 H12
06.01.20251980s terraced house with underfloor heating - heat pump?10

Oben