Flush mounting possible this way - experiences?

  • Erstellt am 2013-05-28 22:47:57

zetterberg

2013-06-06 13:54:11
  • #1


Correct, you did not mention support load, but resting is nothing other than the load being supported by the appliance.

My first post



Fixings are to be applied according to the assembly instructions (worktop, carcass, adjacent cabinets, wall, etc.). Kitchens are fully aligned and anchored and fitted with the worktop before a dishwasher or washing machine is installed. As a kitchen salesperson, you should at least roughly know the basic rules of installation, then you also know what is possible and what is no longer permissible!
 

IKEA-Experte

2013-06-06 14:34:44
  • #2
At Bosch / Siemens, the assembly instructions state that the dishwasher should be tensioned. If a bracket is then placed in the wrong position, that is not good.
 

zetterberg

2013-06-06 14:54:36
  • #3
Ok BSH I didn't know that now, I have to take a look at their system.
 

Similar topics
06.09.2013Good worktop27
29.07.2016Trash bin in the countertop24
06.12.2013Reinforce countertop numeral for cutouts13
28.01.2014Base of the refrigerator and countertop above the refrigerator19
09.12.2016Worktop 5-10mm too short13
25.10.2018Countertop ceramic, quartz or natural stone47
18.10.2020Worktop lighting - URail by Paulmann24
20.07.2018Problem calculating the parapet height for a worktop running into the window24
07.12.2018How much should a worktop made of oak wood cost?16
28.03.2022Error in the countertop, allegedly natural…36

Oben