Detached semi-detached house

  • Erstellt am 2017-07-21 21:41:34

Aero84

2017-07-21 21:41:34
  • #1
Hello everyone,

we own a detached semi-detached house which was completed 2 years ago. The neighboring house is still for sale and not yet built.

However, I wonder if the partition wall is properly compacted/sealed... Can someone tell me something about this? See photo...

Thank you in advance.
Aero

 

11ant

2017-07-21 22:26:47
  • #2
That looks to me like a one-brick thick pumice outer wall shell, behind which there is an insulation board layer. I don't think it's great that the edges of the insulation layer are exposed. On the party wall, the insulation board layer appears to be the outer layer, and on a battens then a foil, which is stabilized against fluttering by additional battens. In the process, a "field" has apparently torn open – that is certainly not "sealed". Was this done by a developer who intends to build on in the same way – but only after selling the neighboring half?
 

Aero84

2017-07-21 22:32:49
  • #3


Thank you for the answer. Yes, the extension will only be done after the sale... Unfortunately, I didn’t quite understand the rest, I’m not very skilled in construction matters ... I will definitely ask to have the foil repaired... What do you mean by "edges of the insulation layer"?
 

11ant

2017-07-21 22:38:05
  • #4

Well, you can see that behind the facing wall there is a layer of yellowish boards. The edge where the boards of the neighboring house butts up against it looks like it is not covered with anything. So they can basically "absorb" moisture or weather there.
 

Alex85

2017-07-21 22:38:24
  • #5
Insulation soaks up water = bad, because wet insulation does not insulate and rots (depending on the material). There should have been weather protection put up until the second half is built.

OT: It is totally stupid to want to build semi-detached houses (oxymoron) with multiple builders. That is a general contractor/developer business.


fleece-coated stone wool, just a guess. Battens on top. Neither likes water.
 

Aero84

2017-07-21 22:46:39
  • #6


Now it’s clear, thanks. I will report this... I’m also surprised that the air gap between the outer wall and the insulation is not sealed, since water and moisture can enter there when it rains... But I don’t know if that can damage the outer wall?
 

Similar topics
14.06.2011New building: Which insulation is appropriate?14
10.07.2011Wall construction and insulation for Kfw 70 house, okay?19
28.10.201236 cm Ytong exterior wall, solid construction, mold formation, insulation37
22.09.2012Insulating prefabricated house with additional insulation, DIY, inexpensive styrofoam19
08.11.2012Insulation in the 70s compared to today, modern insulation, heating costs26
20.11.2012General questions about insulation10
14.01.2013Insulation / Vapor Barrier Top Floor Ceiling / Collar Beam, Open Ceiling14
25.06.2013Saddle roof/insulation into the ridge or up to/on the intermediate ceiling?10
01.07.2013Additional insulation in the Ytong basement (36 cm)14
08.08.2015Insulation wooden beam ceiling10
07.04.2014Planning attic conversion in new construction - heating, ventilation, insulation?14
25.07.2014Great house with some limitations. Access / insulation14
21.08.2014Insulation on upper floor concrete ceiling / roof by own work - vapor barrier?10
19.05.2021Substructure facade rhombus battens without insulation19
16.08.2020Insulation of the attic of an old country house14
02.06.2023Marten in the roof insulation, what can I do???27
07.03.2021Battens and purlins are molding in the new building;17
09.03.2021Reinforce floor slab insulation, reduce heat entry into the upper floor13
24.03.2023Work on basement ceiling insulation with stone wool48

Oben