Alpha Innotec heat pump failure

  • Erstellt am 2021-12-04 16:33:01

Stefan2.84

2021-12-04 16:33:01
  • #1
Hello everyone,

Maybe one of you can give me some quick help. The following error message is displayed by the heat pump.
The manual and the display say that the device resets itself. But nothing happens. Has anyone had this before?

Thanks and best regards
 

andimann

2021-12-04 16:45:37
  • #2
Hi,

Alpha writes the following about it:



sounds somehow like the system got too warm and now needs to cool down.

Best regards,

Andreas
 

Stefan2.84

2021-12-04 16:51:26
  • #3
Could be, unfortunately nothing happens. The error message appeared at some point during the night.
 

halmi

2021-12-04 20:14:31
  • #4
Remove the fuse and put it back in, then see what happens.
 

hampshire

2021-12-05 11:02:36
  • #5
Visually check air supply, nothing may be obstructed.
 

Stefan2.84

2021-12-05 11:32:09
  • #6
So pulling the fuse....waiting.....and putting it back in worked. Although that was not my preferred solution. Now I'll observe what happens.

Which air supply do you mean?
 

Similar topics
02.09.2019Install securing against rolling on the sleeping floor for building acceptance12
19.11.2020Retrofitting external air supply for chimney22

Oben