Which switch with POE and 16 or 24 ports

Good day dear community, another question and I hope for a very good recommendation. My Elli did not want to miss installing a 10" cabinet with over 16 LAN ports. All well and good, but the choice of finding a proper switch with POE was quite limited. Apparently, at least 2 have to be installed. Of course, I could dismantle everything, but time is pressing on me. Therefore, I need solutions. I have already googled and have narrowed it down to two models from TP-LINK and D-LINK. I would gladly listen to your recommendations, regardless of the two models.

Which APs will you use? I would stick to one manufacturer. Unifi also has 10" (8-150W). The question is what you want to do and how simple it should be.

I would go for a 19" cabinet. It’s just a few screws. You can also initially mount the patch panel with brackets in the larger cabinet. Is it a "proper" one with keystone modules? Then you could simply reconnect...

After that, you have free choice of 19" devices.

I would also switch to 19”. The 10” cabinets are quite OK for small installations but limit the choice of components quite a bit. What should the switch be able to do? Managed? POE or POE+?

Among other things APs, but also later the [Doorbird Anlage]. The panels are for crimping. A lousy thing. Regarding a 19 I have also thought about it, but the space has now become less and thus ALMOST impossible to realize.

The panels are for crimping. Bad thing.

Oh, that's possible. I also just recently rebuilt my system and reclamped about 40 LSA strips.

... and ideally switch directly to Keystones when you're already redoing everything.