Screed block "edit"....

  • Erstellt am 2019-07-13 19:09:20

Ulrike1969

2019-07-13 19:09:20
  • #1
I am new here and would like to introduce myself briefly. "Woman alone on the construction site," 50 years old, have been sitting on a - in the truest sense of the word - major renovation for four years. Now my simple question. From when can I drill a hole in concrete screed to fix a plug? So, to make it more understandable, with this screed block I have separated two rooms - which actually were two rooms forty years ago - only in the substructure again into two rooms. In the upper floor covering, it then seamlessly goes from one room to the other. I am aware that screed for floor covering needs at least 28 days. But I only want to insert six plugs to attach a plasterboard stud frame. The two rooms will then be separated by a plasterboard wall with a round arch. I made the screed three days ago. Nothing really holds in wet soft stuff. But maybe someone here in the forum can tell me from when something like that is possible? Thanks Ulrike
 

Ulrike1969

2019-07-14 09:51:21
  • #2
Well, so far I have 11 "likes" according to this weird circle with a "thumbs up" in it. Luckily, I'm not on F.... But ... is my question too stupidly asked or am I too stupid? On my "construction site," quite a bit of shoddy workmanship has fallen on my feet. Three cm of Styrofoam and three cm of top screed, just as an example. Now there is a new build-up coming, and on this occasion with underfloor heating. Sometimes I could really use some help with questions that might be very simple for others. Thanks Ulrike
 

danixf

2019-07-14 10:15:03
  • #3
You have 1 like from user ... I personally can’t help you because I have no idea about it. I haven’t been around that long either, but might know something about it. He knows a lot. Maybe he can help you further.
 

Nordlys

2019-07-14 13:25:55
  • #4
When the screed has set for 48 hours, anchors will hold in it. Do not confuse hardened with dried.
 

guckuck2

2019-07-14 18:25:05
  • #5
I also think hardness is not really the issue, I would be concerned about "dryness." Since drywall is equipped with mineral wool, and moisture is coming from below the component ... hmm
 

Ulrike1969

2019-07-14 22:05:23
  • #6
No, then everything is fine.
For now, only the one row of studwork should hold, so that I can divide the rooms and make "Bambule" in the divided half (old reed ceiling down,...). I still have to sleep somewhere. It’s already dusty enough everywhere. The screed itself will initially stay in the "fresh air" and still has time until it is "completely" dry. Finally closing up the wall will take a while. The complete renovation under my own rear end is already getting chaotic.
Ulrike
 

Similar topics
31.12.2010Installing drywall on walls16
29.01.2014Cost saving/basement/affordable tiles/sealed screed?13
08.05.2014Most moisture from screed?25
14.08.2015temporary flooring for underfloor heating14
10.05.2015Screed uneven - defect removal refused52
10.08.2015In which season of the year is it best to bring screed into the basement10
13.04.2017Screed with gold sand17
28.04.2016Order screed - plaster14
27.05.2016Plastic fittings/water pipes and insulating underfloor heating beneath screed?40
07.08.2016Upper floor without screed - only concrete floor15
08.06.2016Questions about underfloor heating - new subfloor/screed/granite tiles14
31.07.2016Screed does not extend into the reveals at windows / terrace doors on the ground floor12
29.07.2018Perimeter insulation under the floor slab and still XPS under the screed?28
31.10.2016Heating the screed with the utility provider?!12
24.03.2017New house - Which flooring is suitable?71
11.09.2017Raise the planned click vinyl flooring or increase the screed?12
02.10.2019Expanding OG room - Is approval necessary?10
04.11.2021Lay parquet flooring from the hallway into the room17
23.12.2021Is purchasing a house and complete renovation affordable?33
19.12.2024Laying parquet - Expansion joint in screed of varying height11

Oben