Quality differences in interior doors

  • Erstellt am 2020-02-17 19:30:11

M. Gerd

2020-02-17 19:30:11
  • #1
Hello everyone,

we have received an offer for our interior doors and it is supposed to be as follows:

    [*]Jeld Wen
    [*]Solid core panel insert
    [*]white lacquered
    [*]rounded edge with PZ lock, cylinder with 3 keys per door
    [*]wall thickness between 14 and 20 cm

Since soundproofing is important to us, we have a solid core panel insert. Yes, the bottom door seal is missing, but due to the controlled residential ventilation we need this. We understand that with the air gap at the bottom we will not achieve proper soundproofing, but we would like to have as much as possible and reasonable.

The price per door is now relatively low at €340 (including installation, excluding door handles), which is why we are not sure if the door might be of poor quality. But we have a solid core panel, lacquered 3 times, etc. Does anything speak against the manufacturer Jeld Wen?

What do you think? Would the door fit based on the specifications, or does it possibly seem to be of poor quality?
 

Mycraft

2020-02-17 19:40:42
  • #2
This will be a typical SK1 door, they are already quite okay. Of course, it is the first level and it can always be better.
 

Nordlys

2020-02-17 19:47:19
  • #3
We have these Jeldwen doors. They are okay. You can take them.
 

nordanney

2020-02-17 19:55:05
  • #4
Jeld Wen offers good value for money. It can be bought without any reservations.
 

M. Gerd

2020-02-17 20:53:08
  • #5

I don’t know the exact classification. It’s quite possible that it is SK1. Probably more doesn’t make sense anyway, since we have the ventilation slot at the bottom.

Otherwise, Jeld Wen doesn’t seem bad, which should be sufficient for us in this regard. Thanks!
 

Similar topics
15.11.2011Poor sound insulation to the outside in thermal insulation bricks16
17.05.2016Which interior wall material/wall thickness provides good sound insulation?22
20.02.2015Question about soundproofing with drywall11
13.05.2016Brick T9/T10/T11/T12? Thermal insulation vs. sound insulation21
28.11.2016Is sound insulation according to DIN standard 4109 relevant for building permits?16
30.09.2021Sound insulation - differences in interior doors?40
09.11.2016Price difference oak staircase oiled or lacquered14
14.11.2016Soundproofing - weakest link? (Windows?)26
23.08.2017What is the difference in sound insulation between a solid house and a prefabricated house?27
19.07.2018Sound insulation: Thickness of cavity insulation for interior wall?10
09.08.2018Fence as sound insulation towards the neighbor. What inhibits sound the best?27
01.02.2021Y-Tong (aerated concrete) - quality building material? (sound insulation!)91
07.11.2018Is it sufficient as sound insulation according to DIN4109 in a single-family house?11
23.06.2019Little sound insulation in the solid house - what could be the reason?10
01.11.2020Prefabricated house, poor sound insulation85
07.03.2020Door frame not fitting / no sound insulation20
25.01.2020Which material is suitable for the shell construction (thermal and sound insulation)?20
18.07.2021Unfilled bricks and soundproofing - looking for experiences36
14.05.2020Sound insulation VDI Guideline 4100 & DIN 4109 in prefabricated house construction49
23.06.2020Solid wood house - sound insulation, heat protection18

Oben