Formwork wall with or without foundation

So, after I have now excavated deeply, I have poured the foundation.

I will first lay two rows of the retaining wall and then build in the strips for the garden house. So, it is basically also a big L.
I just hope that I get the garden house strips nice and straight!

Looks good, but more iron wouldn't have hurt.

Hmm ok, now too late. I was worried that it would be difficult to align the stones then. I have now laid out the first row dry and already had to push back and forth three times!

The rough positioning is done beforehand, but don’t worry, the first time I also cut some off. I set planting rings but didn’t take the quarter circle into account.

Do you have the shuttering stones with the half-round recess on top? Then put steel in there as well.

It will hold! Yes, horizontally I will place a complete layer on each row. Additionally, I can still place some vertically on the foundation.

Hello M4rvin

Get 12mm rebar. Measure the position of the [schalsteine]. Drill 12mm holes 10cm deep into the foundation. Then hammer in rebar approximately every 30 cm. Let 40-50cm stick out at the top. Then you play it safe.

Steven