Flush-mounted shower base body from various manufacturers

  • Erstellt am 2022-10-19 17:37:23

knoten0815

2022-10-19 17:37:23
  • #1
Hello everyone,

we were considering installing our shower as a concealed installation.
For the overhead shower, we would like this one:
Hansgrohe Pulsify S overhead shower 260 2jet with wall connection. The installation manual states that it must be connected to a Hansgrohe carrier body at the top in the wall.

And for the hand shower, this one:
Hansgrohe Pulsify Select S shower set 3jet

For the control, you now need something for 3 consumers. Unfortunately, with Hansgrohe I only found the expensive Rainselect solutions, or you can install a 3-way valve for selecting the shower + a separate thermostat. I don’t find that very appealing.

With Grohe, however, I found something more appealing:
GROHE Grohtherm SmartControl thermostat pre-assembled set with 3 shut-off valves
Of course, this must be installed with a Grohe carrier body.

Now my question is, can the Hansgrohe overhead shower carrier body be connected with the Grohe thermostat carrier body, and thus operate the Hansgrohe overhead + hand shower with the Grohe thermostat, or must everything come from the same manufacturer?

It would be great if someone knew something about this, I don’t quite understand it all. I thought they are actually only connected with a "normal" pipe, so it shouldn’t matter?!

Thanks & regards
 

SumsumBiene

2022-10-19 18:01:06
  • #2
No, you cannot.

We just spoke with two experts because our Hans Grohe concealed fitting is calcified. You can only combine it with makeshift solutions.
 

knoten0815

2022-10-21 14:16:20
  • #3
Okay, too bad, thank you for your help
 

borderpuschl

2022-10-21 14:51:51
  • #4
Why should this be the case? You need the appropriate base body for both. You have already recognized that yourself. In between, only the piping is done. So what speaks against it?
 

borderpuschl

2022-10-21 14:55:31
  • #5
SumsumBiene probably wanted to install a different manufacturer in an existing base body / flush-mounted body
 

knoten0815

2022-10-21 15:01:40
  • #6


Oh, so it is just as I imagined, that would be great :)
 

Similar topics
22.08.2013Quality problems with Hansgrohe fittings10
21.04.2022Bathroom pictures thread - Show us your bathroom pictures!117
19.04.2015Concealed fittings bathtub with hand shower11
21.10.2015Air-to-water heat pump - Nest Thermostat77
04.06.2020Why building a house almost always costs more than calculated238
30.10.2019Thermostat valves: meaningful?17
02.10.2024Hand shower with decent power from the nozzles?13
16.10.2022Hansgrohe shower faucet experiences17

Oben