Electric heating/infrared heating, power consumption

  • Erstellt am 2012-06-25 14:58:07

Nargi

2012-06-25 14:58:07
  • #1
Hello!

I’m new here, so I hope I’m posting in the right place :)

We are currently in the process of converting our basement (old house, until recently it was just lined with earth, no heating, no installations, etc.) – and it is now supposed to become a hobby room.
What we don’t need there is water, fortunately we already have light and electricity.
Now we are looking for a heater and since a renovation with a boiler etc. would cost a fortune, the easiest alternative was electric.

Now the question about that:
Normal electric heating is really expensive, but I have repeatedly read online that infrared, although also electric, is supposedly quite cheap. Has anyone already had such a heater in use?
What is the actual electricity consumption like?
Which dealers are recommendable? There is a lot of cheap stuff in hardware stores and then some with seemingly better quality…
Is infrared actually a concern?? I read conflicting things about it…

Thanks in advance!

Best regards,
Nargi
 

€uro

2012-06-25 16:02:49
  • #2
Hello, What is the physical explanation for this? :confused: Best regards
 

€uro

2012-06-26 18:31:22
  • #3
Anyone who believes in such advertising nonsense is to blame themselves ;-) E-infrared is at best useful as a temporarily limited supplementary source, but not as the sole heat source, especially given the high space heating loads of an old building!

Regards
 

JH-CADArchitekt

2012-07-05 10:37:31
  • #4
Depends! In a passive house, I would also consider it as the sole heat source, since the heat demand is too low for a system with high initial costs to be worthwhile. In an old building, definitely NOT! Here, the heat demand is too high, as are the maintenance costs. Just do the math! The lower room temperature with radiant heating is due to the operative room temperature! Humans perceive the average of surface temperature and room air temperature. How much you can lower and save with infrared heating compared to a regular radiator heating, you can calculate yourself. More than 1-2°C is not possible! So not really something to save!
 

€uro

2012-07-05 10:52:18
  • #5
Correct, the specific framework conditions are decisive. The higher the actual demand, the higher the requirements for the efficiency of the system.

best regards
 

JH-CADArchitekt

2012-07-05 11:53:07
  • #6
Exactly as €uro says! And conversely, the less heating demand I have (e.g. passive house), the less I have to focus on the efficiency of my system.
 

Similar topics
07.10.2016Which heating is recommended for KfW 55?58
02.09.2013Which heating system for prefab houses: air source heat pump, geothermal, solar, photovoltaic17
25.07.2014Energy saving regulation without heating10
30.04.2015KFW70 with gas-solar heating65
19.05.2015Heating children's room, bedroom, and bathroom14
27.07.2015New building heating?13
23.10.2015Prefabricated house heating: Gas / Air heat pump / Underfloor heating22
21.12.2015The matter with heating - air/air, air/water, or gas?28
09.05.2016Compliance with the 2016 Energy Saving Ordinance with the following heating14
21.01.2016Is the heating oversized?44
25.01.2016Which heating system would you choose for our planned new building?15
29.04.2016Which heating? Please provide recommendations27
03.11.2016Which heating system to choose when replacing the heater after 36 years?24
23.10.2016No heating is approved?!15
11.06.2019Is there a warranty also on heating / air pump?13
01.02.2017Set the heating correctly47
23.06.2017Heating via ventilation with heat pump57
19.08.2017Retrofitting old building with new gas heating cost18
18.11.2022Heating not available - Who bears the costs?77

Oben