Due to slight unevenness in the wooden floorboards, I want to lay 3 mm MDF boards before installing a 3 mm thick vinyl floor covering. How can I fix the edges together, e.g., tape or?
With tongue and groove joint and glue? "Normally" you would apply a leveling compound to the floor or fill the floor before laying the vinyl on the floor. I don't know if the idea with the MDF boards is that good?
With tongue and groove connection and glue? "Normally" you would apply a leveling compound to the floor or fill the floor before laying the vinyl on the floor. I don't know if the idea with the MDF boards is that good?
Equal measure doesn't work because the planks give a little, which could cause the equal measure to break under the vinyl. 3 mm has no tongue and groove and thicker is not possible.
Aus Gleichmaße geht nicht weil die dielen etwas nachgeben
I seemed to have read somewhere about leveling compound for plank floors, a kind of flexible leveling compound. With MDF boards, I would always think that the edges could break off.