Storing drywall sheets

  • Erstellt am 2014-02-01 11:12:56

2014-02-01 11:12:56
  • #1
Since I have ordered a large number of gypsum boards for drywall construction, the question of storage now arises. I don't really need them all right now, but they can't stay in the garage where they are currently placed. You are not supposed to stand them up because they will deform and become rounded due to their own weight. What temperature should the room actually have where these boards can be stored for a longer period of time?

Regards
Hans
 

2014-02-02 18:17:07
  • #2
Hello Hans,

we also made the mistake of standing them up. Then a pallet of gypsum boards was ruined.
Then we laid them down and always only stacked five on top of each other. They survived the winter that way.
However, the room was heated, because I think (but I’m not exactly sure) that temperature and humidity also play a role there.
Anyway, we had no more problems and were able to process the boards very well in the spring.

Best regards Gerda
 

2014-02-04 09:44:20
  • #3
Hi Gerda,

thanks for your reply.
Lying down is definitely better. I already noticed during processing that if a panel leaned against the wall for a few hours, it warped. Over a long period, this will probably get even worse.
However, I first have to see where I can store them because of the temperature. Our garage is not heated. I also don’t want to set up an electric heater for the whole winter.
 

2014-02-04 15:31:46
  • #4
So the gypsum plasterboards should be stored in a dry room, the room does not have to be fireproof. Also, you can stack far more than 5 boards on top of each other, for example in building supply stores they are sometimes stacked board by board, and nothing happens :)
 

2014-02-06 20:34:25
  • #5
It is important to store the plasterboards on the floor. When standing them up, the edges are often damaged. The room must be dry. I always place wood underneath so that air can circulate there.
 

2014-02-09 07:06:06
  • #6
We always store the plasterboards horizontally and never vertically. It is important that the room is dry, and thus they can be well preserved there.
 

Similar topics
08.01.2014Where do we put the house and garage?10
03.02.2014Cost estimate single-family house with garage11
30.07.2014Bungalow with 140 sqm and garage in the floor plan13
05.08.2014First offer, 157m2 with basement, KFW 70, garage14
05.11.2014Garage: design possibility of the roof, appearance14
11.03.2015Planning optimal arrangement of house, garage, and driveway13
06.05.2015Draft single-family house with garage/carport - please provide evaluation22
11.06.2015Single-family house with a granny flat & garage14
27.08.20152 full floors, passage to garage, utility room under stairs25
11.09.2015Building a garage on the boundary is not possible according to the architect.11
29.12.2015Single-family house floor plan / garage on the ground floor?10
30.12.2015Floor plan single-family house with garage, self-planning17
18.10.2016Plan location of house & garage within building window *Pre-planning*129
01.10.2024Single-family house 145 sqm with garage without basement25
07.03.2017The neighbor's terrace borders the garage11
10.09.2017Floor plan, elongated single-family house, integrated garage, no basement16
11.05.2018Garage: What does "attached" mean? Does it mean that the masonry is connected?15
18.01.2019Development plan: Garage on the boundary outside the building window53
11.12.2021Wall heaters do not reach the desired temperature53

Oben