Statics

  • Erstellt am 2015-09-25 15:50:26

schakazulo

2015-09-25 15:50:26
  • #1
Hello,
in our house, 3 walls were demolished over 6 months ago.
An exterior wall, which was supported with 2 steel beams over the adjacent masonry (masonry consists of bricks).
A load-bearing wall inside, which is supported by 2 wooden posts measuring 16*16 and a 4-meter-long 16*32 beam under the ceiling.
A non-load-bearing wall, which we also supported in the same way with wooden beams as the load-bearing one.
Before the renovation, a structural engineer was here and said everything was fine.
Now we have hairline cracks on the walls in some rooms, but only in the plaster.
The floor has also settled slightly, about 8mm-1cm, which I can see on the door frames that are no longer exactly flush with the floor.
All only in the areas above the load-bearing wall.
Is it normal that the house might need to settle at first?
From the lower renovated floor, nothing can be seen.
None of the beams are bending or showing any cracks.
 

toxicmolotof

2015-09-25 16:35:05
  • #2
What does the structural engineer say about that? And what does the construction company say?

I wouldn’t find it very funny if the floor/the ceiling moves.
 

schakazulo

2015-09-25 18:00:01
  • #3
The construction company says it would be completely normal as everything needs to settle. I am a student and live with my parents. They are satisfied with that, but it still worries me. Maybe someone has had similar experiences with such a renovation?
 

merlin83

2015-09-25 22:57:39
  • #4
Have an independent expert come in at a cost and check whether that is true. Everything else is negligent.
 

ypg

2015-09-25 23:20:43
  • #5
To get straight to the point: I have no idea about extensive renovation measures in an old building. However, the screed in a new building settles by about 1 cm, so one can deduce that a new screed in an old building, provided it is not a dry screed, also lowers by a few millimeters. Besides, one probably always has to assume settlement cracks where a lot of "mass" is processed? Regards Yvonne
 

Similar topics
24.07.2016Structural engineer costs - How much does a structural engineer or architect cost?17
18.05.2011Minimum scope of services Architect + structural engineer possibly self-performance?10
07.09.2012Single-layer masonry vs. double-layer masonry with ETICS19
29.01.2014Cost saving/basement/affordable tiles/sealed screed?13
27.03.2014Interior walls upper floor lightweight construction instead of masonry?12
10.05.2015Screed uneven - defect removal refused52
13.04.2017Screed with gold sand17
28.04.2016Order screed - plaster14
07.08.2016Upper floor without screed - only concrete floor15
03.08.2016Structural engineer and KfW55 certification12
09.11.2019Sound problem: Does noise come through masonry - through the exterior plaster?20
11.01.2018Partition wall thickness for duplex house. Structural engineer plans 17.5 cm14
02.04.2018Offer structural engineer + thermal insulation certificate Energy Saving Ordinance 201616
03.09.2019Should the gap transition from the roof box to the masonry be closed or not?11
11.05.2021Which masonry is suitable for noise level range III24
04.09.2021Structural engineer not for probation acceptance, and now?21
10.02.2022Sale of renovated or unrenovated condominium? Renovation or not?10
03.06.2022Masonry - Closing/filling the wall behind the underfloor heating manifold14
17.08.2022Masonry is crumbling! Is there a risk of collapse?15
10.10.2023Disposable e-cigarette disposed of in the masonry13

Oben