Roof covering for shed roof 10°

Hello everyone,

one more question that is giving me some headaches regarding our project. Which roofing should be used for a 10° shed roof?

Everywhere I read that clay tiles can only be used from 12°. And here there is a variant already for 10°.

link removed by moderation; construction expert

Or should I stick with trapezoidal steel sheets?

p.s.: at some point there will also be photovoltaics on the roof

Best regards

Whether we have an eaves overhang or not, does that also depend on the [roof covering]?

Brick also works at 10 degrees. There were recently two other threads on the same topic. Maybe someone could link them. The roof overhang should always work.

Brick also works at 10 degrees. There were recently two other threads on the same topic. Maybe someone could link them. Roof overhang should always work.

I would be very grateful for the links. Can't find the threads.

p.s.: irgendwann kommt auch noch Photovoltaik aufs Dach

I find "someday" bad: realizing that in a later construction phase is okay with me, but I would plan it right away, also with regard to the pre-installation of connections. And possibly after a conversation with the photovoltaic planner, reconsider the roof pitch so that you don’t end up with "two different pitches" (roof surface and photovoltaic): I consider solar modules with a pitch far below the earth axis tilt inefficient; on flatter surfaces, they are tilted accordingly. That can look disharmonious.