Refrigerator Frosty BCF228/64 in 233cm tall cabinet?

Hello

While planning the kitchen in the Ikea Online Kitchen Planner, I noticed that the refrigerator Frostig BCF228/64 is not selectable among the tall cabinets with a height of 233cm. This refrigerator is selectable among the tall cabinets with a height of 211cm.
Does anyone know if there is a way to install the BCF228/64 in one of the 233cm tall cabinets anyway, or is it possible to do so and the planner just doesn’t show this refrigerator there???
Best regards
Section Chief

Hello, you need a 92 cm door at the bottom and a 125 cm door at the top for the tall cabinet. To make it fit, the appliance must be placed on a shelf at the height of the 6th or 7th hole - you will have to try this out. The reason the planner does not show this option is probably the weight of the freezer plus its contents. Even the reinforced shelf or the cabinet walls will not be able to bear it without the shelf supports tearing out. Therefore, I would cut four wooden blocks measuring 8 cm x 8 cm to the appropriate length and insert them between the floors over the feet so that the load acts directly on the feet. To make it look nicer and easier to clean, you can put a panel in front or build a drawer that fits between the blocks.

I don't quite understand the effort now.

Doors remain 70-90-57 and the top two doors are connected to each other by perforated sheet metal. This creates a compartment above the refrigerator, which is only accessible when you open the refrigerator, but you don't need all kitchen utensils all the time (cake tins, etc.). So I don't see this as a big problem.

That is also an option. Which version is realized is ultimately a matter of appearance and body size.