Indirect lighting in new construction, build it yourself

  • Erstellt am 2021-08-09 08:11:19

Pacc666

2021-08-09 08:11:19
  • #1
Hello,

we have bought a newly built semi-detached house and want to install indirect lighting in certain rooms.

Can someone help us how we can build the indirect lighting ourselves, for example under the ceiling?

What is the easiest way to build indirect lighting in a new building?

We want to combine indirect lighting and direct lighting depending on what is desired.
 

hampshire

2021-08-09 08:51:28
  • #2
Ideas: 1. Wall-ceiling transition with a decorative molding and a concealed LED strip behind it, which illuminates the ceiling and is not directly visible. Visually effective only in fairly high rooms. 2. Work with partial suspensions and illuminated recesses. I have not seen this implemented beautifully in small rooms yet. 3. Ceiling uplighters with wall or ceiling mounting as half- or full-shell. 4. Track or cable system with luminaires tiltable towards the ceiling. 5. Use diffuse light instead of indirect light, e.g., with a backlit stretch ceiling or a daylight panel.
 

Pacc666

2021-08-09 09:34:47
  • #3
thank you for your ideas

ceiling height is approx. 2.35m and the individual rooms or areas where I want the indirect light are rather small.

we had already imagined that the light sources (as the only sensible option I would say LED strips) are hidden
 

hampshire

2021-08-09 09:42:21
  • #4
At 2.35, I advise against a continuous edge on the wall with LEDs behind it for indirect ceiling lighting - it makes the room look visually deeper when the light is off.

Better to work with diffusers than installed indirect technology in small rooms. The light of an uplighter is simple and very cozy - they are quite easy to find as a floor lamp.
 

Pacc666

2021-08-09 12:24:47
  • #5
ok thanks

so it can be stated that indirect light with LED strips is only possible with skirting boards under the ceiling or if the entire inner ceiling is suspended and a gap for the LED strips is left on the outside

otherwise, you'd have to use floor lamps, uplighters, etc.?
 

fach1werk

2021-08-09 12:41:57
  • #6
For LED strips, pay attention to the temperature development and, if necessary, its dissipation. Not all remain cool. For half shells, I would like to point out the material plaster. Equally affordable as it is good.
 

Similar topics
02.11.2016Installing LEDs and energy-saving lamps17
12.06.2012LED Lighting Experiences / Tips12
11.06.2013Radiator in the new building?13
22.11.2013Costs of inheritance, demolition, new construction15
06.02.2017Insulate new construction 36.5 aerated concrete?60
16.05.2014What makes a new building expensive?20
10.05.2015Recommendation for LED spots29
30.10.2015LED spots with wide beam angle10
27.04.2016Hanging ceiling for LED18
02.10.2016Which LED recessed spotlights / price?14
26.02.2017Ceiling above the shower - LED spots12
27.03.2019LED Spots Cost - Can it be that expensive?14
05.02.20193x1.5 or 5x1.5 NYM in the roof box for LED spots?17
19.05.2020Lighting planning ceiling LED spots48
25.07.2021LED strip ascending parallel to the staircase12
03.10.2021Main lighting with LED strips: is it useful?43
19.11.2021Stair lighting with LED strip13
23.03.2023LED staircase lighting distances for curved stairs21
14.06.2024LED recessed spotlights for 60mm ceiling outlet box10
25.04.2025Mini LED Spots for Terrace Canopy37

Oben