How to install an Alsvik faucet without a spray?

Hi

Why not the "Ringskär" then? It has a different handle but also a long neck and no pull-out spray.



Includes 10 years warranty. More about it in the warranty brochure.
Mixer tap with flow restrictor for lower water flow at the same pressure, saves water and energy.
The cartridge with hard ceramic seals/discs withstands high friction during temperature control.
The high spout is practical for washing large pots, etc.
Installation must be carried out according to local building and installation regulations. Please seek professional advice if in doubt.
Mounted through a 35 mm hole in a worktop/sink up to 50 mm thick.
Tool for easy installation of the mixer tap is included.
With flow restrictor (8 l/min) – saves energy and water.
Includes hoses with 3/8" fittings. Connection length: 35 cm.
The mixer tap is suitable for pressure systems. Tested for water pressure up to 16 bar (1600 kPa). Recommended working pressure: 1.0-5.0 bar (100 kPa - 500 kPa).
The swivel spout is set for 360° rotation, but can be adjusted to 90° or 120°.
Care instructions
Do not use steel wool, scouring powder, hard or sharp utensils that may scratch the stainless steel surface.
Clean with a soft, damp cloth (water and mild dish soap or soap solution).
Wipe dry with a dry cloth.

if it doesn't have to be Swedish, then there are countless offers on eBay, in hardware stores, etc. I think it will be difficult to remove the shower head, because that is the water outlet of the mixer tap. The outer casing, as far as I can see, has no preparation for a filter on the spout, for example, and whether the size corresponds to that of a filter is questionable. Besides, I think that the tap inside is not designed for direct water contact and is, for example, coated accordingly, because everything is covered by the shower head. the design really leaves much to be desired. I would look outside the blue-and-yellow-house.