Bux1984mm
2018-06-14 21:45:31
- #1
Hello everyone,
I need some advice regarding an offer for the new installation of a gas condensing boiler.
Here are the details:
Boiler & Control
Buderus GB182i-14 W H
Buderus Logamatic RC310 white
7x Buderus Logatrend-VC/VCM accessory package
2x Buderus VC-Profile 33/900/400, R
2x Buderus VC-Profile 33/600/2000, R
1x Buderus VC-Profile 33/900/1400, R
1x Buderus VC-Profile 33/600/800, R
1x Buderus VC-Profile 33/900/1200, R
1x Logatrend Therm direct 740x500
1x Logafix Universal fitting set, white
1x Logatrend Therm MSR, RAL 9016 white
1x Condensate pump for disposal of condensates from condensing devices
1x Magnetic/sludge separator for horizontal and vertical installation
1x System separator according to DIN EN 1717 for safe filling of the heating system
1x Initial filling according to VDI 2035
1x Water softening
1x Connection of the boiler system with the piping system
1x Fixing dowel HZ ND 80-8
30x Baseboard HZ SLF 2000 white
10x Inner corner HZ IEL 2000 W
10x Outer corner HZ AEL 2000 W
40x Clamp HZ for attachment over pipes
1x Flat rate for electrical materials
1x Adjustment of the gas line with all relevant safety devices according to TRGI-DVGW
Pipe connections including fittings
The installation includes:
Installation of the new boiler
Installation of all necessary heating circuit components
Installation & connection of condensate drain
Installation & connection of gas flow monitor
Insulation of all new water-carrying pipes
Dismantling of the old system as well as disposal
Filling the system with softened water according to VDI2035
Bleeding the heating system
Commissioning & instruction
Total cost: 17,500 euros
5 years warranty
A 100 square meter house needs to be heated.
Is the dimensioning okay? And is the price reasonable? Is there anywhere to save?
Hot water remains via instantaneous water heater.
Looking forward to your feedback.
Best regards
I need some advice regarding an offer for the new installation of a gas condensing boiler.
Here are the details:
Boiler & Control
Buderus GB182i-14 W H
Buderus Logamatic RC310 white
7x Buderus Logatrend-VC/VCM accessory package
2x Buderus VC-Profile 33/900/400, R
2x Buderus VC-Profile 33/600/2000, R
1x Buderus VC-Profile 33/900/1400, R
1x Buderus VC-Profile 33/600/800, R
1x Buderus VC-Profile 33/900/1200, R
1x Logatrend Therm direct 740x500
1x Logafix Universal fitting set, white
1x Logatrend Therm MSR, RAL 9016 white
1x Condensate pump for disposal of condensates from condensing devices
1x Magnetic/sludge separator for horizontal and vertical installation
1x System separator according to DIN EN 1717 for safe filling of the heating system
1x Initial filling according to VDI 2035
1x Water softening
1x Connection of the boiler system with the piping system
1x Fixing dowel HZ ND 80-8
30x Baseboard HZ SLF 2000 white
10x Inner corner HZ IEL 2000 W
10x Outer corner HZ AEL 2000 W
40x Clamp HZ for attachment over pipes
1x Flat rate for electrical materials
1x Adjustment of the gas line with all relevant safety devices according to TRGI-DVGW
Pipe connections including fittings
The installation includes:
Installation of the new boiler
Installation of all necessary heating circuit components
Installation & connection of condensate drain
Installation & connection of gas flow monitor
Insulation of all new water-carrying pipes
Dismantling of the old system as well as disposal
Filling the system with softened water according to VDI2035
Bleeding the heating system
Commissioning & instruction
Total cost: 17,500 euros
5 years warranty
A 100 square meter house needs to be heated.
Is the dimensioning okay? And is the price reasonable? Is there anywhere to save?
Hot water remains via instantaneous water heater.
Looking forward to your feedback.
Best regards