Flooring thickness - Information for screed layers

  • Erstellt am 2022-05-27 17:09:48

askforafriend

2022-05-27 17:09:48
  • #1
We need to specify the floor covering thickness for the screed installer. We are uncertain about how to specify the mortar bed for the tiles and the parquet adhesive for the parquet. How is something like this indicated? To be installed are

[Parkett 14mm plus Parkettkleber]
[Fliesen einmal 8mm und einmal 9mm plus Mörtel]
[Vinyl 4,2mm Trittschalldämmung 1,5mm]
 

Scout**

2022-05-27 19:49:33
  • #2
Just pass it on as written here, I strongly hope the screed layer is not doing this for the first time. Depending on the covering, you might also need leveling compound; for that, you need to know the screed quality, which the screed master knows best….

Otherwise, don’t you have a site manager?!
 

askforafriend

2022-05-27 19:57:00
  • #3


Did you tell the screed layer that during house construction (without mortar, adhesive, etc.) or are you just guessing now :)
 

Scout**

2022-05-27 20:04:15
  • #4
Yep, for the bathroom the main contractor’s tiler automatically communicated everything and since we had opted out of the standard laminate, he contacted us to find out our coverings, he didn’t care about the glue, he calculated that himself. However, we only have a change of covering from hallway to tiles on one level… otherwise uniform per floor. Don’t forget to inform the door maker as well right away
 

askforafriend

2022-05-27 20:09:24
  • #5

Now we are slowly but surely getting to the bottom of it. You didn’t lay the floors yourself and built with GU. I need someone here who has individual contracting and does the floors themselves
 

i_b_n_a_n

2022-05-27 20:27:07
  • #6
then please ask your suppliers for the floor material. They should be able to provide you with the necessary information. It is also a good idea to call in the floor covering specialist ;)

P.S. We built with individual contracts and laid the floors ourselves. We calculated the difference for the screed layer ourselves and it fit except for two millimeters. This was then adjusted to the frame depth with leveling compound
 

Similar topics
28.04.2014What type of covering can be used in the bathroom instead of tiles?14
06.08.2016Parquet or tiles with cats - are there concerns?11
05.11.2022Which flooring goes over tiles?19
23.08.2018Screed or tiles with a concrete look39
18.12.2018Underfloor heating, laminate, or tiles: which is warmer for the feet?35
08.01.2019Experience with gluing tiles on tiles?16
21.08.2019Tile choice - how/where to start?28
12.07.2019Offer for tile installation. Inspection12
10.11.2019Tiles or vinyl in kitchen and hallway19
19.11.2019Tiling the kitchen countertop24
14.09.2020Which areas in the bathroom are tiled?58
27.07.2020Tile bathroom installation direction?11
27.07.2020Tiles - the same everywhere?14
30.09.2023Transition profile tiles -> vinyl flooring in "beautiful"11
06.08.2021Height adjustment between tiles and laminate13
11.03.2021Tiles first or plaster first12
10.10.2021Terrace: Laying tiles on gravel19
03.12.2014Cost savings in the basement - cheap tiles or sealed screed (which one)?11
05.11.2021Tiling the bathroom yourself as a layman? - Opinions11
02.05.2022How harmful is parquet glue to health when using underfloor heating?22

Oben