Window Renovation - Cost per Square Meter of Window Area

We want to know approximately what one has to calculate per square meter of window area including installation and disposal of the old windows. The windows should be triple-glazed.

Thank you very much

Regards Timo

That varies greatly with the quality of the windows, i.e., initially with the material and possibly the coating. White plastic is the cheapest, wood with colored aluminum on the outside is the most expensive. Currently common on the market are plastic windows with colored foil. These are usually available in the profile variants AD (only rebate gasket) or MD (also center gasket).

With the question about the price per square meter, you are already quite right, but not entirely: a typical calculation is mixed from the area and the perimeter of the frames.

Disposal is more likely offered to you by the installer than by the dealer. Installation (and also removal, if the surroundings are to remain intact!) is not a beginner’s matter.

So we wanted plastic windows in Ral7016

That doesn't sound extraordinary at first - in stock sizes, the white plastic windows are sometimes significantly cheaper as promotional items from hardware stores, the wrapping can also be done by a car wrap specialist (but one who does full wraps, not just letter stickers).

For custom sizes, you'd rather get the windows finished. If it is not supposed to be a wrap, you would need to look for a Gealan processor.

What is it about: I suspect renovation, and almost every piece in a different size?

What is currently installed, and what is the reason for the replacement?

For the dark frames, the thermal aging stress is higher, so I would also pay attention to shading on the sunny side.