Zip-Freak
2015-02-22 19:11:19
- #1
Hello everyone!
I am currently renovating my single-family house with about 140m² of living space.
The gas connection was newly installed (previously oil) and now a new condensing boiler is to be installed.
The plumber sent two offers... one for the Viessmann Vidodens 222-F and then the Vitodens 333-F.
The 333-F is about €500 more expensive... and now I wonder if it’s worth it?!
The 222-F at a glance:
- Heat output 4.8 - 19 KW
- 100L hot water tank --> Enameled
The 333-F
- Heat output 1.9 - 19 KW
- 100L hot water tank --> Stainless steel
- Energy-saving high-efficiency pump (energy label A)
- Wireless control unit (or via smartphone with app)
What I don’t yet know: the even larger 343-F is equipped with a control system for solar support... Whether solar will be installed later, I don’t know yet. Otherwise, could I retrofit that on the 333-F if needed?
What are your experiences with the devices?
Did I understand correctly that only the 333-F can be controlled via an app?
Can I also do without the remote control and work ONLY with my smartphone?
How much is saved because the 333-F can operate at a lower output of 1.9 KW?
How much electricity does the great pump of the 333-F actually save? Or is it all just nonsense?
Is the wireless control (also via internet) of the 333-F really used? Or just a gimmick that “nobody” needs?
I would be very grateful for any decision-making help!!!
I am currently renovating my single-family house with about 140m² of living space.
The gas connection was newly installed (previously oil) and now a new condensing boiler is to be installed.
The plumber sent two offers... one for the Viessmann Vidodens 222-F and then the Vitodens 333-F.
The 333-F is about €500 more expensive... and now I wonder if it’s worth it?!
The 222-F at a glance:
- Heat output 4.8 - 19 KW
- 100L hot water tank --> Enameled
The 333-F
- Heat output 1.9 - 19 KW
- 100L hot water tank --> Stainless steel
- Energy-saving high-efficiency pump (energy label A)
- Wireless control unit (or via smartphone with app)
What I don’t yet know: the even larger 343-F is equipped with a control system for solar support... Whether solar will be installed later, I don’t know yet. Otherwise, could I retrofit that on the 333-F if needed?
What are your experiences with the devices?
Did I understand correctly that only the 333-F can be controlled via an app?
Can I also do without the remote control and work ONLY with my smartphone?
How much is saved because the 333-F can operate at a lower output of 1.9 KW?
How much electricity does the great pump of the 333-F actually save? Or is it all just nonsense?
Is the wireless control (also via internet) of the 333-F really used? Or just a gimmick that “nobody” needs?
I would be very grateful for any decision-making help!!!