Tall cabinet 220 x 40 x 37 DIY, which front to choose?

Hello,

I need a 220 cm tall cabinet with a depth of 37 cm and a width of 40 cm in front of a post standing in the room (unfortunately, I can't fit 60 cm anymore).

However, this is only available as a standard in 200 cm, but the other tall cabinets standing next to it are 220 cm. I have now put together one from
2x 80 cm wall cabinets (40x80x37)
1x 60 cm wall cabinet (40x60x37)

For the doors, either the following:
1 x 200 cm door and above it a 20 cm drawer front with Utrustra hinges for horizontal cabinets (this is how I closed a 20 cm gap at the top in our kitchen)

or
1 x 140 cm front (which is normally intended for the horizontal wall cabinets) 1 x 80 cm wall cabinet front

Question:
Do the 140 cm fronts also have the drilling for hinges/cup hinges?

Hello, everything that bears the name door has cup holes for hinges.

Hi melad,
I would get a 220x60x35 and a 40x35 wall cabinet from metod and replace the shelves.

Regards, Mr. Rossi

I would do the same if there were even a 220 cm high cabinet in a smaller depth.

Hi Ikea expert, you're right. I have other options. ;)

why so complicated... i have a 240 x40x37 tall cabinet. it consists of a 200cm and 40cm high one. simply cut the sides of the 40cm high one at the top to 20cm and the matching fronts (e.g. 80 80 60) to go with it, feddisch ☺