Remove drawers rationally

Hej,

probably a very stupid question. But I have to remove a Rationell kitchen drawer of the current design and so far have not figured out how to do it!

Help! :)

dyfa

Hello,

push the white "nipple" on the left and right of the rail from below with a sharp object. Then you can pull out the slider.
It's not hard at all if you know how :)

best regards

Tell me, how do you come up with that? Of course, fiddling around with a sharp object there? Ideally, so that the whole drawer gets bent and scratched and if there’s ever a warranty issue, you find yourself unable to explain it. Great!

Reach under the drawer front at the front and pull upwards with a good jerk. You need strength for that. But it has to be that way, because the drawer is supposed to take real weight. If you don’t trust yourself enough, go to your nearest Ikea and have them show you. Most employees will encourage you to try it yourself. ;)

NfU

Nadine

Tell me, how do you come up with that? Of course, fiddling around there with a sharp object? Preferably so that the whole drawer is bent and scratched and if there is ever a warranty problem, you get into trouble explaining it. Great!

Reach under the drawer front at the front and pull upwards with a good jerk. You need strength for that. But it has to be that way because the drawer is supposed to carry real weight. If you don’t dare properly, go to your nearest Ikea and have them show you there. Most employees will encourage you to try it yourself. ;)

NfU

Nadine

Absolutely not...
Otherwise, you will get a problem in the long run. Nadine, please first take a look at the drawer. If you often lever the drawer out like that with force, you will break it.
As Bootos described it, that is correct. A screwdriver or a knife (rounded tip) is sufficient. Although in my opinion a screwdriver is also a sharp object and the better choice.

Regards Maverick1854

Thank you Brootos.