Questions about kitchen installation

If I take this plan, I have a problem with the Ikea baseboard because it is only 8cm high and here it should be at least 9cm?! Also, the kitchen is 88cm high. Apparently, the feet can be screwed out up to 87.5cm. But if I screw the feet out that far, I assume I need an even higher base (6cm = 15cm). So that's how much I've figured out now, but I don't know how to solve it. (Hab da auch keine Erfahrung damit)

I don't care about the front for now. What's important to me is that the dishwasher is installed. Then I will take some time a few weeks later to work on the front.

Hello,

just very briefly about the dishwasher: it's best to take a look at the installation instructions. When installing at the end of a row (i.e. if only one side panel follows), an additional panel is used.

Regards,
IKEA-Freund

Thanks in advance! I'll take a look!

Hello,
the questions have almost all been answered before, but you really have to read yourself to death.

1) The countertop should not be supported by the dishwasher. Therefore, a support panel must be installed next to it. This can be made from a side panel. If there is a wall directly next to it, you can also support the countertop, for example, with two UTBY support legs and close the gap between dishwasher and wall only with a filler panel.

2) As long as there is no danger that the base cabinets will tip forward because, for example, all loaded drawers are pulled out at the same time, it is sufficient to place the cabinets on the four feet. Use common sense as with everything.

3) Watch the videos: [MEDIA=youtube]96hIssRveYU[/MEDIA] (Chapter #2 from 1:30)

4) They can withstand that, as long as you do not repeatedly install and uninstall the cabinet rails. Otherwise, the holes in the carcass become worn out and the screws no longer hold properly.

5) See videos.

The carcass is 80 cm high, the feet in the standard setting are 8 cm. With a 4 cm countertop, this results in a working height of 92 cm. The dishwasher is designed for a maximum niche height of 87.5 cm. It may therefore be necessary for you to place the dishwasher on a raised base, e.g., a piece of countertop. For a semi-integrated dishwasher, you need ERSÄTTARE, a 20 cm high and a 60 cm high front.