Problems with blenders in Ikea Metod kitchen island

Hello everyone,

I am currently a bit desperate and hope for your help. We planned/had planned a method kitchen island. 3*60 side by side and behind that 2 60s with a depth of 30 cm. It looks something like this: mm
MMM
The island is positioned against the wall on the left side. That means we have to cover a 60 on the side and back and a 30 on the side. We were supplied with panels here. However, they now protrude over 3 cm beyond the carcass. The doors have 1.5. That means 1.5 cm too much. That can’t be right?!? In my view, sawing can’t be the point either. After all, then you have cut edges visible. How did you solve the problem? When planning, there was never any mention that we would have to saw anything ourselves.

I hope you understand my explanations.

Many thanks, basti

The additional centimeter comes from the wall rail, which is to be covered. Since you don't have a wall rail at the island, you either have to cut the top side (cut edges against each other) or set up the cabinet rows with a 2 cm distance from each other.