Is it possible to raise the door of Ikea Faktum FA336 using FA 326?

Hello,
I would like to get the wall cabinet FA336 including the Ädel door for our kitchen tomorrow. I want to operate the door with the "lifts" from the wall cabinet FA326.
Is that possible? Has anyone done this before?
I assume that the matching Ädel door for the cabinet has 2 cup holes due to the string attachment.
So the question is whether the door lifts can be screwed in areas where no cup holes are present
AND
are the door lifts sold separately? Because they are not included with the FA336.

Thanks for a quick response. I have to go directly tomorrow.

The hinges are only sold with the carcass. At best, they can be ordered as spare parts. Since earlier hinges or gas springs wear out quickly, information should be available in other threads. Try searching for Blum Aventos HK, that's their original name. On Blum's website, you can find all the technical data. The cup drilling should not generally be a problem. Take a look at the installation instructions for the horizontal wall cabinet.

Hi Ikea expert, thanks for the info. Then I'll first call IKEA tomorrow morning and ask if they will sell me two. Otherwise, you can get them on Ebay for €25. Can you possibly find something like that at the hardware store?

DIY stores might also have such flap hinges (possibly from other manufacturers), maybe only on order. There it will probably be more expensive rather than cheaper.

AVENTOS HK might be oversized for the small door, and HK-S might be sufficient. In any case, pay attention to the manufacturer's specifications.

Hello,

so my inquiry yesterday at Ikea Cologne was fruitless. You can't get the things individually.
If you only buy the 70x40 corpus, you pay 45€. Then they would be included.
On Ebay, you can get the HK set for 42€ and the HK-S set for 25€.

I got the Faktum 336 with Ädel Beech door. So corpus height of 35cm.
In the Ebay offer, I have an HK-S 400-1000 and an HK-S 960-2215.
I guess the 2nd is too strong? Because then the flap might not close automatically, right?
Otherwise, I would have bought the bigger one, in case I buy a floor plan corpus someday. So that I could operate it with the HK. But now it is first important that the door of the F336 also closes automatically.

Is 25€ a good deal for that? Can one order it?

Just compare the prices at ligno-shop.de and Beschläge-onlline.de. There you can also find explanations about the performance factor and necessary accessories.