How do I get rid of carpet remnants?

  • Erstellt am 2008-11-21 07:29:45

Alfred-1

2008-11-21 07:29:45
  • #1
Hello everyone, I tore out the carpet in one room, underneath was an old PVC floor that has to stay. Now there are lots of carpet residues on the floor and they can only be removed with a scraper. But if I have to scrape everything away, it will take weeks; besides, it is very connected to the PVC, what can I do?
 

Klaus-1

2008-11-21 09:24:23
  • #2
Hi, you can rent a machine that removes it from the floor. But if the old PVC underneath is not to be damaged, then it will not be feasible. You can try using a hairdryer, it loosens the residue and then you can carefully scrape it off the floor with a spatula. Good luck with that!!
 

Rudo-1

2008-11-23 08:05:13
  • #3
Hello, this is really a problem because if you are not allowed to damage the PVC, then a spatula will not help you either. Because even if you work very carefully, you will still cause one or the other scratch. Maybe there are chemical agents with which you can dissolve it?
 

Zement-1

2008-11-25 07:32:40
  • #4
Hello, try using the hairdryer, if you warm the residue with the hairdryer it comes off more easily. It does not damage the surface underneath and you don’t have to scrape so much. But I can only wish you that it goes away completely because that is a nasty problem.
 

schwarzmeier-1

2009-01-08 23:57:18
  • #5
TEBO remains

The crucial question is, ---is the TEBO glued, fixed, or loosely laid? If only fixed or loosely laid, then the problem might possibly be solved with warm water and some dish soap. If glued, I would contact my liability insurance or pray. :D:eek::(
 

Jonas-1

2014-08-09 11:23:50
  • #6
I just experienced that too and warmed these carpet remnants with a hairdryer. Then removed them with an electric scraper. At the beginning I was a bit careful, but it went quite well and nothing got scratched.
 

Similar topics
13.01.2016Is the PVC floor losing color??10
17.08.2016PVC floors14
27.02.2016Remove carpet with a spatula or with a sanding machine?11
10.02.2022New construction aluminum or PVC roller shutter slats19

Oben