Garden house / tool shed max. 270x190 cm

Hello everyone,

I am planning, according to the attached picture, to build a garden house or tool shed in autumn 2025 or spring 2026.

I have paved an approximately 4.50m large area on the east side of my outdoor facility to build something about the size of max. 270x190cm.

The ground: I had dug out about 30cm deep, filled with gravel, compacted (vibrated) and then paved accordingly and compacted again afterwards.

So I should have no problems regarding the foundation. My idea was to build something without a floor so that I can use the paved area directly as the floor.

Has anyone done something similar and can recommend a manufacturer of a kit accordingly?
Is it also possible to build something yourself here and does anyone have recommendations?

Price-wise we are actually quite open... We don’t want a tin shack for 300€, but also not a second home for 3,000€.

I think that in this quite small size we can get something reasonable that is still affordable.

Any other hints/tips to keep in mind?

Looking forward to input! Thanks!

recommend a manufacturer of a kit accordingly?

I have had good experiences with Holzwurm (in 56244 Hahn am See). You have to google it yourself, as I cannot post a link. They have a large selection at moderate prices.

If Heerlen is accessible to you, you can visit a great show garden with models at Eurohandel there. Friends had a good experience with a house from the mail-order range. We did not get permission for a garden house and took a nicely made construction trailer from the 60s. It works great too, but there is always a step for getting in and out.

Thanks already for the information.

I had also considered building one out of aerated concrete blocks. I would just have a bit of respect for the roof installation.

Price-wise, it certainly wouldn't be that expensive.