Fire protection wall made of glass

  • Erstellt am 2014-10-07 15:28:40

kellerdach

2014-10-07 15:28:40
  • #1
Hello,

I have a very small plot of land, whose corner is "equipped" with a construction burden approximately 4 meters long. As far as I know, this can be avoided by erecting a fire protection wall on the boundary. Such walls can also be made of glass, but they must comply with DIN 4102 and have an approval number from the German Institute for Construction Technology in Berlin. Does anyone have experience with this topic? How much does a glass fire wall cost me? What should be considered?

Regards Michael
 

Bauexperte

2014-10-08 10:41:56
  • #2
Hello Michael,


Do I understand correctly that you want to build on the boundary? What does your building authority say about this idea?

Rhenish regards
 

kellerdach

2014-10-08 10:51:04
  • #3
The idea comes from them!
 

Bauexperte

2014-10-08 11:35:32
  • #4
Hello,


Maybe you could come up with a bit more info...?

What was the building obligation registered for? How long is the fire protection wall supposed to be? Are corresponding windows perhaps an alternative? What does the building authority say? What exactly do you want to build where? Etc. ...

... then maybe the help will work out

Rhenish greetings
 

kellerdach

2014-10-08 13:05:29
  • #5
The neighbor built a small terrace area (or similar) directly on the boundary 5 years ago: directly on the boundary there is a 4m long low wall with a glass front. The construction is covered but open. Trash bins are stored in or under it. This results in a 4x2 meter easement on my already small property.

I do not want to specifically leave out a corner because of this easement and am therefore considering how I can bypass it. The building authority explained to me that the easement exists due to fire protection.
 

Bauexperte

2014-10-09 12:52:40
  • #6
Hello Michael,

This is the classic working environment for a creative architect.

A fire protection wall does not have to be entirely made of glass; it probably wouldn't look odd just viewed from the inside either; apart from the fact that it would become quite expensive in times of the 2014 Energy Saving Ordinance. Take your documents and consult an architect you trust; small plots of land are a challenge. But as one of my architects always rightly points out: there are no bad plots, only bad planning!

You shouldn't save money in the wrong place here, but rather invest, then you'll enjoy the result for a long time in the end.

Rhenish greetings
 

Similar topics
21.08.2014Construction costs when building with architects. What does your experience say?18
15.10.2015No construction, as there is no building obligation62
17.06.2015Is a building load possible despite designation?18
08.10.2015Registering a building obligation for a garage - advantages / disadvantages?15
02.12.2016Plots in Cologne only through developers?54
06.06.2017Local bank markets plots - linked deal26
07.02.2018Architect's suggestions disappointing - What next?32
11.05.2019Building an end terraced house - Which technical requirements should be considered?195
12.03.2019Disadvantage of a building encumbrance in our specific case?25
09.07.2020Register a building burden retroactively on your own property?13
10.11.20202 (dream) properties - financing unclear. Save equity?40
25.09.2024Architect search Munich + surrounding area (recommendations?)15
21.06.2021Avoid building obligations by alternative placement of the construction project?17
05.08.2021Divide and develop plots themselves24
15.11.2021Wishlist for the architect32
12.01.2022Union of two plots - redefine the building envelope?20
16.05.2022Which plots are the best in this building area (with plan)?17
05.09.2023Application for a new development area: Selection of plots41
24.11.2024Building authority requires open space design plan for single-family house - experiences?37

Oben