Building envelope KFW55

  • Erstellt am 2013-06-30 20:34:04

Nutshell

2013-06-30 20:34:04
  • #1
Hi,

my house 120 sqm is getting 24cm Poroton and 12cm rigid foam boards as insulation 24cm collar beam insulation and 5cm slab insulation

Is that good?
 

Nutshell

2013-06-30 20:53:23
  • #2
Found some more information
The floor slab insulation is Styrodur C rigid foam boards WLG 035
installed on a fine grading and covered with a PE film as a protective layer.
A stainless steel ring ground electrode is planned below the insulation.

Facade insulation consists of at least WLG 040 rigid foam boards, multi-layer plaster and fleece reinforcement, and top plaster, grain size 2-3 mm.
Base insulation boards in the area of the base.

Roof insulation
Between the rafters and collar beams in the developed area of the attic, a 24 cm thick mineral wool insulation WLG 035 is planned.
 

Der Da

2013-07-01 10:17:40
  • #3
What do you want to hear now?
Whether it is possible that [KFW 55] is achieved with that?
What does your contract say? If [KfW55] is guaranteed here, then your builder must also ensure that it fits.
 

Nutshell

2013-07-01 19:59:51
  • #4


Of course KFW 55 is guaranteed. I just want to know whether the measures are good, or if any objections from the experts appear here ;)
 

Bauexperte

2013-07-02 11:43:45
  • #5
Hello,


How are we supposed to know that? You have only provided the bare minimum about the new building, the location of the plot regarding the sun is unknown, the technology to be installed (which is probably not little, with a 24er brick) and, and, and.

If your provider has contractually guaranteed you KfW 55, they are also obliged to comply with it. Furthermore, an external expert must be involved in the construction project; they should intervene if something is not executed correctly.

Rhenish regards
 

Nutshell

2013-07-02 14:14:51
  • #6



Oh, okay
The house faces southwest from the terrace (4 floor-to-ceiling windows).
A floor heating system will be installed throughout the entire house except for the utility room.
The heating will be a gas condensing boiler with 5 sqm solar flat collectors.
A decentralized ventilation system Lumos E2 will also be installed.
 

Similar topics
19.06.2009Evaluation of the KfW 60 House Contract: Credit Check for House12
19.01.2013KfW 70 - which roller shutters in the new city villa?10
12.05.2014KfW 70 without ventilation system107
03.05.2011KfW loan okay or is there a cheaper option?10
21.08.2011Which heating system is suitable for our Kfw 70 house without a basement?15
10.07.2011Wall construction and insulation for Kfw 70 house, okay?19
07.10.2016Which heating is recommended for KfW 55?58
08.07.2012KfW 70 Ventilation / Exhaust System10
30.05.2012Massive house costs KFW 70 - Prefabricated house65
27.04.2014KFW 70 is not achieved, target values for gas condensing boilers23
01.06.2014KfW funding measures started late13
14.10.2014Surcharge KfW 7011
13.02.2015KfW Energy Efficient Building11
10.03.2015Is an exterior masonry wall KS 17.5 + 16 mineral wool + facing bricks with KfW 70 realizable?18
17.02.2015KFW funding sensible / Energy advisor, construction supervision?10
23.10.2016Thermal insulation, Energy Saving Ordinance, KFW 70 / 55 / 40 - Your experiences31
22.02.2015KfW loan as equity capital. Which bank does this?15
07.12.2015Heating question new building KFW 70 air heat pump + solar, ice storage?29
25.06.2021Insulation of the base with WLG 02510

Oben